Ceramic tile
Compare glazed field tile for an approved wall or floor use.
Plan this optionExplore a scope and request a reviewed quote. Coastal confirms service availability, qualified trade partners, site conditions and final pricing before a proposal.
TILE & BACKSPLASHES
Ceramic and porcelain tile
Install ceramic or porcelain tile selected for the actual floor or wall application. Layout, tile size and movement-joint details form part of the specification alongside color.
START WITH THE DETAILS
What goes into
the work.
Measure each tiled surface. Note tile size, pattern, corners, openings, edges and wet areas; waterproofing is a separate assembly.
Typical scope to confirm
- Confirm application and substrate
- Plan tile layout and edge pieces
- Set and grout the specified tile
Make it specific to your project.
Enter the amount of work and choose the details you know. Your choices follow you into the Project Builder.
LOW / MIDDLE / HIGH REFERENCE
Low$12per sq ft
Middle$26per sq ft
High$40per sq ft
Low and high are published reference endpoints. Middle is their arithmetic midpoint, not a quoted average, product tier or firm price.
Match the reference scope first
- Confirm Tile before applying this reference to your quantity. The existing numeric row is ceramic tile only; porcelain needs a product-specific quote.
The figures above remain the source reference. They do not price these selections or a complete installed project.
A planning reference for this service only. Selections, local labor, access, quantities and existing conditions need Coastal’s review. Do not add overlapping whole-project and component ranges.
HomeGuide · research checked 2026-10-22 · US national · installed
What changes the price
- Ceramic versus porcelain selection
- Tile format and cutting
- Preparation and access
What the reference covers
- Ceramic tile
- Installation labor
Allow for these separately
- Shower base construction
- Structural reinforcement
- Heated-floor system
- Major substrate correction
- Waterproof shower system
- Porcelain upgrade
KNOW WHAT COMES NEXT
From first idea to finished work.
Plan the scope
Select tile size and assess substrate flatness and support.
Prepare and approve
Check the base, flatten where needed and confirm wet-area details if relevant.
Complete the work
Lay out and install the tile, grout and movement joints.
Review and close out
Allow specified cure time, inspect alignment and review cleaning.
- Planning & preparation
- 1–4 weeks
- Work on site
- 2–8 working days
Illustrative planning allowance for the stated scope, not a promised start or completion date. On-site time starts after approvals and materials are ready; procurement, inspection waits, curing and discoveries can extend the calendar.
Pattern complexity and tile size · Substrate preparation or waterproofing · Mortar/grout cure and specialty trim
PERMIT PLANNING
Usually cosmetic work
Usually a finish-only scope when the structure, room use and utilities stay unchanged. This is a starting classification, not an address-specific exemption; confirm any related regulated work before starting.
- Opening walls or changing structural support
- Moving or adding wiring, plumbing or ventilation
- Historic exterior restrictions or regulated-material removal
ENGINEERING & DESIGN
Engineering is not usually needed
Engineering is not usually part of this finish-only scope. Stop for review if hidden damage, structural changes or unusual support loads are found.
- New structural work or damaged framing
- Unverified heavy-load support
Confirm requirements with the city or county responsible for the property before work begins. The address, exact scope and adopted code determine the final requirements.
MAKE IT FIT YOUR HOME
Your starting options.
Compare the scope before choosing products. Any direction can be refined with Coastal.
MATERIALS & DETAILS
Find your finish.
These original swatches show a general visual direction. Confirm a physical sample, exact finish code and product compatibility before ordering.
Tile appearance
Warm stone look
Soft beige tile direction. Generic visual direction, not an exact manufacturer sample.
Use this direction
Soft white
Light neutral tile direction. Generic visual direction, not an exact manufacturer sample.
Use this direction
Charcoal stone look
Deep gray tile direction. Generic visual direction, not an exact manufacturer sample.
Use this directionTile layout direction
Straight stack
Aligned rows and joints. Generic visual direction, not an exact manufacturer sample.
Use this direction
Running bond
Offset rows, subject to tile instructions. Generic visual direction, not an exact manufacturer sample.
Use this direction
Herringbone
Angled repeating layout with additional cuts. Generic visual direction, not an exact manufacturer sample.
Use this directionPRODUCT RESEARCH
Brands & real-world examples.
Manufacturer references help compare options. They do not imply a Coastal dealership, endorsement, or a product selected for your project.
Daltile
Ceramic, porcelain, natural stone and decorative tile; floor and wet-area approvals vary by product.
Explore example photos
Open the original source for product and installation imagery. These are reference links, not Coastal project photographs.
Publisher photographs show tile installation and a kitchen with a tiled floor. Not a Coastal project photograph.
Stock reference photograph; not a Coastal project or specified product.
YOUR PROJECT, VISUALIZED
Choose a direction.
See it in your space.
Start with common ceramic and porcelain tile options, personalize the details, then upload a photo to create an AI concept.
Ceramic tile
Compare glazed field tile for an approved wall or floor use.
- Tile: Ceramic
- Custom product, finish code, or request: Ceramic tile. Finish direction: Warm stone look. Compare glazed field tile for an approved wall or floor use.
Porcelain tile
Review denser tile options and application ratings.
- Tile: Porcelain
- Custom product, finish code, or request: Porcelain tile. Finish direction: Soft white. Review denser tile options and application ratings.
Large-format tile
Allow for substrate flatness review and handling.
- Tile: Ceramic
- Tile format: Large format
- Custom product, finish code, or request: Large-format tile. Finish direction: Charcoal stone look. Allow for substrate flatness review and handling.
FROM INSPIRATION TO YOUR SPACE
Your home. This direction.
The example photo is inspiration. Your personalized concept applies your saved service and finish selections to the photo you upload.
- Choose a preset and adjust its selections.
- Add a photo of the room or area.
- Create a concept, compare it, and keep it with your project.
AI concepts are illustrations. Product matches, measurements and feasibility require Coastal’s review.
YOUR NEXT STEP
Bring it into your plan.
Keep rooms, measurements and choices together in the Project Builder.
Related scopes
Research sources & pricing notes
Reviewed 2026-10-23. Published ranges describe the source’s stated scope and geography; they are not an Oklahoma adjustment or a Coastal estimate. Do not add overlapping project ranges together.
- Tile installation cost — HomeGuide · US national
- Daltile product reference — Daltile · United States product catalog
Stock photograph license · Finish swatches and scope diagrams are original illustrations.