Standard interior wallboard
Specify an appropriate board for ordinary dry rooms.
Plan this optionExplore a scope and request a reviewed quote. Coastal confirms service availability, qualified trade partners, site conditions and final pricing before a proposal.
DRYWALL, CEILINGS & INSULATION
Drywall installation
Install drywall on prepared framing with board selection and finish level defined for the room. Plan joints and visible finish expectations before painting is scheduled.
START WITH THE DETAILS
What goes into
the work.
Measure the affected wall/ceiling area and height. Record openings, texture and damage. Older ceiling materials may require assessment before disturbance.
Typical scope to confirm
- Confirm framing readiness and board selection
- Hang panels and treat joints
- Prepare the agreed finish level
Make it specific to your project.
Enter the amount of work and choose the details you know. Your choices follow you into the Project Builder.
LOW / MIDDLE / HIGH REFERENCE
Low$1.50per sq ft
Middle$2.50per sq ft
High$3.50per sq ft
Low and high are published reference endpoints. Middle is their arithmetic midpoint, not a quoted average, product tier or firm price.
A planning reference for this service only. Selections, local labor, access, quantities and existing conditions need Coastal’s review. Do not add overlapping whole-project and component ranges.
HomeGuide · research checked 2026-10-22 · US national · installed
What changes the price
- Wall and ceiling surface area
- Board type and finish level
- Height and access
What the reference covers
- Panels
- Hanging, taping and finishing
Allow for these separately
- Framing reconstruction
- Painting
- Insulation unless itemized
- Old drywall removal
- Framing repair
KNOW WHAT COMES NEXT
From first idea to finished work.
Plan the scope
Confirm board type, thickness, backing and any rated assemblies.
Prepare and approve
Protect surfaces, address the cause and prepare safe access and backing.
Complete the work
Hang or patch, tape, apply coats and match texture with drying intervals.
Review and close out
Inspect under normal light and confirm the paint scope.
- Planning & preparation
- 1–3 weeks
- Work on site
- 2–6 working days across visits
Illustrative planning allowance for the stated scope, not a promised start or completion date. On-site time starts after approvals and materials are ready; procurement, inspection waits, curing and discoveries can extend the calendar.
Patch size and number of visits · Drying conditions and texture matching · Water damage or material assessment
PERMIT PLANNING
Check the scope and jurisdiction
Permit needs depend on the work and property address. OKC and Edmond review structural alterations; Moore requires permits for most remodels. Confirm finish-only exceptions and any separate trade permits.
- Changes to walls, structure or building use
- Electrical, plumbing or HVAC changes
- Work within a floodplain or historic district
ENGINEERING & DESIGN
Engineering is not usually needed
Engineering is not usually part of this finish-only scope. Stop for review if hidden damage, structural changes or unusual support loads are found.
- New structural work or damaged framing
- Unverified heavy-load support
Confirm requirements with the city or county responsible for the property before work begins. The address, exact scope and adopted code determine the final requirements.
MAKE IT FIT YOUR HOME
Your starting options.
Compare the scope before choosing products. Any direction can be refined with Coastal.
MATERIALS & DETAILS
Find your finish.
These original swatches show a general visual direction. Confirm a physical sample, exact finish code and product compatibility before ordering.
Wall finish direction
Smooth
Even plane with minimal intentional texture. Generic visual direction, not an exact manufacturer sample.
Use this direction
Orange peel
Fine scattered texture. Generic visual direction, not an exact manufacturer sample.
Use this direction
Knockdown
Flattened irregular texture. Generic visual direction, not an exact manufacturer sample.
Use this directionPRODUCT RESEARCH
Brands & real-world examples.
Manufacturer references help compare options. They do not imply a Coastal dealership, endorsement, or a product selected for your project.
USG Sheetrock
Gypsum panels, compounds, tape and textures; select an assembly appropriate to the room and project.
Explore example photos
Open the original source for product and installation imagery. These are reference links, not Coastal project photographs.
Publisher photographs show overhead panel installation and taped walls. Not a Coastal project photograph.
Stock reference photograph; not a Coastal project or specified product.
YOUR PROJECT, VISUALIZED
Choose a direction.
See it in your space.
Start with common drywall installation options, personalize the details, then upload a photo to create an AI concept.
Standard interior wallboard
Specify an appropriate board for ordinary dry rooms.
- Custom product, finish code, or request: Standard interior wallboard. Finish direction: Smooth. Specify an appropriate board for ordinary dry rooms.
Moisture-related assembly
Review approved panels for the location without treating them as a waterproof shower system.
- Custom product, finish code, or request: Moisture-related assembly. Finish direction: Orange peel. Review approved panels for the location without treating them as a waterproof shower system.
Enhanced finish level
Discuss a smoother finish for demanding light or paint conditions.
- Custom product, finish code, or request: Enhanced finish level. Finish direction: Knockdown. Discuss a smoother finish for demanding light or paint conditions.
FROM INSPIRATION TO YOUR SPACE
Your home. This direction.
The example photo is inspiration. Your personalized concept applies your saved service and finish selections to the photo you upload.
- Choose a preset and adjust its selections.
- Add a photo of the room or area.
- Create a concept, compare it, and keep it with your project.
AI concepts are illustrations. Product matches, measurements and feasibility require Coastal’s review.
YOUR NEXT STEP
Bring it into your plan.
Keep rooms, measurements and choices together in the Project Builder.
Related scopes
Research sources & pricing notes
Reviewed 2026-10-23. Published ranges describe the source’s stated scope and geography; they are not an Oklahoma adjustment or a Coastal estimate. Do not add overlapping project ranges together.
- Drywall installation cost — HomeGuide · US national
- USG Sheetrock product reference — USG Sheetrock · United States product catalog
Stock photograph license · Finish swatches and scope diagrams are original illustrations.