Painted finish
Use an opaque cabinet coating after suitable preparation.
Plan this optionExplore a scope and request a reviewed quote. Coastal confirms service availability, qualified trade partners, site conditions and final pricing before a proposal.
PAINTING & REFINISHING
Cabinet painting and refinishing
Refresh cabinet surfaces by painting or refinishing after reviewing the existing coating and substrate. Decide which exposed surfaces, interiors and hardware are included before selecting the finish.
START WITH THE DETAILS
What goes into
the work.
Measure paintable area and note ceiling height, surfaces, preparation and existing coating. Count doors and cabinet fronts separately.
Typical scope to confirm
- Assess coating condition and adhesion
- Define cleaning, preparation and door handling
- Approve a finish sample and reassembly scope
Make it specific to your project.
Enter the amount of work and choose the details you know. Your choices follow you into the Project Builder.
LOW / MIDDLE / HIGH REFERENCE
Low$30per linear ft
Middle$50per linear ft
High$70per linear ft
Low and high are published reference endpoints. Middle is their arithmetic midpoint, not a quoted average, product tier or firm price.
Match the reference scope first
- Confirm Finish before applying this reference to your quantity. The source is cabinet painting, not stain or clear refinishing.
- Confirm Surface before applying this reference to your quantity. The cabinet run reference does not apply to walls, trim or exterior surfaces.
The figures above remain the source reference. They do not price these selections or a complete installed project.
A planning reference for this service only. Selections, local labor, access, quantities and existing conditions need Coastal’s review. Do not add overlapping whole-project and component ranges.
HomeGuide · research checked 2026-10-22 · US national · installed
What changes the price
- Cabinet count and detail
- Coating removal required
- Paint versus transparent finish
What the reference covers
- Paint materials
- Painting labor
Allow for these separately
- New cabinet boxes
- Countertops
- Refacing with new doors unless listed
- Replacement components
- Refacing
- Transparent refinishing
KNOW WHAT COMES NEXT
From first idea to finished work.
Plan the scope
Assess existing cabinet coating, adhesion and refinishing access.
Prepare and approve
Protect the space, assess old coatings and clean, repair and prime surfaces.
Complete the work
Apply the specified finish system with appropriate dry times.
Review and close out
Review coverage and edges; provide color and care records.
- Planning & preparation
- 1–4 weeks
- Work on site
- 4–10 working days plus cure
Illustrative planning allowance for the stated scope, not a promised start or completion date. On-site time starts after approvals and materials are ready; procurement, inspection waits, curing and discoveries can extend the calendar.
Surface preparation and repairs · Occupied areas or exterior weather · Coating dry and cure times
PERMIT PLANNING
Usually cosmetic work
Usually a finish-only scope when the structure, room use and utilities stay unchanged. This is a starting classification, not an address-specific exemption; confirm any related regulated work before starting.
- Opening walls or changing structural support
- Moving or adding wiring, plumbing or ventilation
- Historic exterior restrictions or regulated-material removal
ENGINEERING & DESIGN
Engineering is not usually needed
Engineering is not usually part of this finish-only scope. Stop for review if hidden damage, structural changes or unusual support loads are found.
- New structural work or damaged framing
- Unverified heavy-load support
Confirm requirements with the city or county responsible for the property before work begins. The address, exact scope and adopted code determine the final requirements.
MAKE IT FIT YOUR HOME
Your starting options.
Compare the scope before choosing products. Any direction can be refined with Coastal.
MATERIALS & DETAILS
Find your finish.
These original swatches show a general visual direction. Confirm a physical sample, exact finish code and product compatibility before ordering.
Paint color direction
Warm white
Soft off-white. Generic visual direction, not an exact manufacturer sample.
Use this direction
Coastal blue gray
Muted blue-gray. Generic visual direction, not an exact manufacturer sample.
Use this direction
Deep navy
Dark blue accent. Generic visual direction, not an exact manufacturer sample.
Use this directionWood tone direction
Natural oak
Warm light grain. Generic visual direction, not an exact manufacturer sample.
Use this direction
Medium walnut
Medium brown grain. Generic visual direction, not an exact manufacturer sample.
Use this direction
Weathered gray
Muted gray-brown grain. Generic visual direction, not an exact manufacturer sample.
Use this directionPRODUCT RESEARCH
Brands & real-world examples.
Manufacturer references help compare options. They do not imply a Coastal dealership, endorsement, or a product selected for your project.
Sherwin-Williams
Emerald Urethane Trim Enamel is a coating option for cabinet and trim painting after substrate and adhesion review.
Explore example photos
Open the original source for product and installation imagery. These are reference links, not Coastal project photographs.
Publisher photographs show white and dark gray cabinet paint schemes. Not a Coastal project photograph.
Stock reference photograph; not a Coastal project or specified product.
YOUR PROJECT, VISUALIZED
Choose a direction.
See it in your space.
Start with common cabinet painting and refinishing options, personalize the details, then upload a photo to create an AI concept.
Painted finish
Use an opaque cabinet coating after suitable preparation.
- Finish: Paint
- Surface: Cabinets
- Custom product, finish code, or request: Painted finish. Finish direction: Warm white. Use an opaque cabinet coating after suitable preparation.
Stained refinish
Assess whether stripping and a transparent finish are viable for the wood.
- Finish: Stain
- Surface: Cabinets
- Custom product, finish code, or request: Stained refinish. Finish direction: Coastal blue gray. Assess whether stripping and a transparent finish are viable for the wood.
Two-tone scheme
Separate island or accent cabinetry with an approved color combination.
- Finish: Paint
- Surface: Cabinets
- Custom product, finish code, or request: Two-tone scheme. Finish direction: Deep navy. Separate island or accent cabinetry with an approved color combination.
FROM INSPIRATION TO YOUR SPACE
Your home. This direction.
The example photo is inspiration. Your personalized concept applies your saved service and finish selections to the photo you upload.
- Choose a preset and adjust its selections.
- Add a photo of the room or area.
- Create a concept, compare it, and keep it with your project.
AI concepts are illustrations. Product matches, measurements and feasibility require Coastal’s review.
YOUR NEXT STEP
Bring it into your plan.
Keep rooms, measurements and choices together in the Project Builder.
Related scopes
Research sources & pricing notes
Reviewed 2026-10-23. Published ranges describe the source’s stated scope and geography; they are not an Oklahoma adjustment or a Coastal estimate. Do not add overlapping project ranges together.
- Kitchen cabinet painting cost — HomeGuide · US national
- Sherwin-Williams product reference — Sherwin-Williams · United States product catalog
Stock photograph license · Finish swatches and scope diagrams are original illustrations.