Standing-seam metal
Concealed-fastener panels with system-specific seam details.
Plan this optionExplore a scope and request a reviewed quote. Coastal confirms service availability, qualified trade partners, site conditions and final pricing before a proposal.
ROOFING
Metal roofing
Select a metal roofing system around roof shape, slope and fastening method. Panel profile, coatings, trim and penetration details should be coordinated as a complete system.
START WITH THE DETAILS
What goes into
the work.
Use measured roof surface area or a reliable roof report, not the home’s floor area. Record pitch, stories, layers, edges and penetrations.
Typical scope to confirm
- Measure roof planes and verify substrate and slope
- Select panel profile, metal and coating
- Detail edges, transitions and penetrations
- Coordinate underlayment, ventilation and compatible fasteners
Make it specific to your project.
Enter the amount of work and choose the details you know. Your choices follow you into the Project Builder.
LOW / MIDDLE / HIGH REFERENCE
Low$9per sq ft
Middle$12.50per sq ft
High$16per sq ft
Low and high are published reference endpoints. Middle is their arithmetic midpoint, not a quoted average, product tier or firm price.
Match the reference scope first
- Confirm Roof system before applying this reference to your quantity. The displayed rate is standing-seam metal, not exposed-fastener metal.
- Confirm Work before applying this reference to your quantity. These roof-coverage rates do not price repair, tie-ins, flashing or ventilation as equivalent work.
The figures above remain the source reference. They do not price these selections or a complete installed project.
A planning reference for this service only. Selections, local labor, access, quantities and existing conditions need Coastal’s review. Do not add overlapping whole-project and component ranges.
HomeGuide · research checked 2026-10-22 · US national · installed
What changes the price
- Standing-seam versus exposed-fastener profile
- Metal gauge, coating and panel lengths
- Complex valleys, penetrations and site forming
What the reference covers
- Metal roof installation
- Specified roofing materials
Allow for these separately
- Unpriced structural upgrades or old-roof removal
- Solar equipment or specialty snow-management systems
- Structural repairs
- Unpriced tear-off
- Premium copper/zinc systems
KNOW WHAT COMES NEXT
From first idea to finished work.
Plan the scope
Confirm metal profile, substrate, fastening and thermal-movement details.
Prepare and approve
Confirm the roofing system, permit scope, weather window and property protection.
Complete the work
Remove affected roofing, review decking and install the selected roof and flashing.
Review and close out
Inspect details, clear debris and review product and workmanship information.
- Planning & preparation
- 2–8 weeks
- Work on site
- 3–10 working days
Illustrative planning allowance for the stated scope, not a promised start or completion date. On-site time starts after approvals and materials are ready; procurement, inspection waits, curing and discoveries can extend the calendar.
Roof complexity and weather · Concealed decking or framing damage · Specialty materials and structural repairs
PERMIT PLANNING
Check the scope and jurisdiction
OKC requires a reroofing permit when work on an existing one- or two-family home exceeds 500 sq ft; altered rafters or ridge beams need a building permit. Norman’s asphalt-shingle FAQ says roofing itself needs no permit. Confirm the address and structural scope.
- OKC reroofing over 500 sq ft
- Replacement or alteration of structural roof members
- Edmond substantial roof replacement; minor shingle repairs have an exception
ENGINEERING & DESIGN
Confirm design requirements
Review the load path, existing supports and proposed changes before work. An engineer may be needed for nonstandard spans, added loads, damage or a reviewer-requested design; a permit alone does not mean every detail needs engineering.
- Load-bearing changes or uncertain framing
- Nonstandard spans, concentrated loads or damaged supports
- Soil, foundation or retaining conditions beyond an approved design
Confirm requirements with the city or county responsible for the property before work begins. The address, exact scope and adopted code determine the final requirements.
MAKE IT FIT YOUR HOME
Your starting options.
Compare the scope before choosing products. Any direction can be refined with Coastal.
MATERIALS & DETAILS
Find your finish.
These original swatches show a general visual direction. Confirm a physical sample, exact finish code and product compatibility before ordering.
Metal finish direction
PRODUCT RESEARCH
Brands & real-world examples.
Manufacturer references help compare options. They do not imply a Coastal dealership, endorsement, or a product selected for your project.
McElroy Metal
Standing-seam and other residential metal roof systems.
McElroy Metal
Exposed-fastener alternative, quoted separately from standing seam.
Explore example photos
Open the original source for product and installation imagery. These are reference links, not Coastal project photographs.
Source photograph shows a standing-seam residential roof installation. Example by the source, not a Coastal project.
Stock reference photograph; not a Coastal project or specified product.
YOUR PROJECT, VISUALIZED
Choose a direction.
See it in your space.
Start with common metal roofing options, personalize the details, then upload a photo to create an AI concept.
Standing-seam metal
Concealed-fastener panels with system-specific seam details.
- Roof system: Standing-seam metal
- Main color / finish: Dark bronze
- Custom product, finish code, or request: Standing-seam metal. Finish direction: Dark bronze. Concealed-fastener panels with system-specific seam details.
Exposed-fastener metal
Through-fastened panels with planned fastener maintenance.
- Roof system: Exposed-fastener metal
- Main color / finish: Charcoal
- Custom product, finish code, or request: Exposed-fastener metal. Finish direction: Charcoal. Through-fastened panels with planned fastener maintenance.
Metal shingle or tile profile
Review a specialty appearance with its own assembly requirements.
- Main color / finish: Soft white
- Custom product, finish code, or request: Metal shingle or tile profile. Finish direction: Soft white. Review a specialty appearance with its own assembly requirements.
FROM INSPIRATION TO YOUR SPACE
Your home. This direction.
The example photo is inspiration. Your personalized concept applies your saved service and finish selections to the photo you upload.
- Choose a preset and adjust its selections.
- Add a photo of the room or area.
- Create a concept, compare it, and keep it with your project.
AI concepts are illustrations. Product matches, measurements and feasibility require Coastal’s review.
YOUR NEXT STEP
Bring it into your plan.
Keep rooms, measurements and choices together in the Project Builder.
Related scopes
Research sources & pricing notes
Reviewed 2026-10-23. Published ranges describe the source’s stated scope and geography; they are not an Oklahoma adjustment or a Coastal estimate. Do not add overlapping project ranges together.
- Metal roof cost — HomeGuide · US national
- Residential metal roofing types — McElroy Metal · US national
- Max-Rib roof and wall panels — McElroy Metal · US national
Stock photograph license · Finish swatches and scope diagrams are original illustrations.